Use a moist cloth to clean the surface

Tape the vinyl graphic in place and measure from multiple vantage

points to ensure that it is level. (We highly recommend using painters tape)

Step away from the wall and take a look to ensure placement

Once you are satisfied with the position, apply another piece of tape across the bottom of

the vinyl graphic.

 STEP 5 REMOVE WHITE BACKER PAPER

With the tape functioning as a hinge, flip the vinyl graphic down rub graphic with applicator

and carefully remove the backing paper from the transfer tape.

STEP 6 APPLICATION

With the graphic in place, apply pressure with a credit card or squeegee applicator.

Working from the center to the edge, evenly force the air from beneath the image.

STEP 7 REMOVE TRANSFER TAPE

Remove the tape from the top of the graphic. Now carefully peel away the transfer tape at an angle.